滾動軸承試驗機遠程監測系統的設計與應用
摘 要：利用虛擬儀器、數據庫和無線網絡技術設計開發基于C/S與B/S混合結構的滾動軸承遠程監測系統，整個系統由下位機實時監測子系統、上位機監測診斷子系統以及兩者的數據通信3部分組成，能夠滿足實時數據的獲取與處理（尤其是大型二進制數據的存儲問題）、異常數據的篩選與上傳以及遠程用戶的信號分析和故障診斷等工作。對6309深溝球軸承的全壽命周期試驗結果表明：該系統能夠?qū)崟r(shí)監測軸承的運行狀態，并通過對篩選后的異常數據進一步分析得到故障原因和故障部位，具有較高的實用價值。
關鍵詞：滾動軸承；遠程監測；故障診斷；C/S結構；B/S結構
中圖分類號：TH133.33；TP206；TP277.3；TP391.9 文獻標志碼：A 文章編號：1674-5124（2013）05-0083-05
Design and application of remote monitoring system of rolling bearing tester
QIAN Si-si， ZHANG You-yun， ZHU Yong-sheng， YAN Yu-ping
（Theory of Lubrication & Bearing Institute，Xi’an Jiaotong University，Xi’an 710049，China）
Abstract: A remote monitoring system of rolling bearing using the virtual instrument， database and wireless network technology was developed which has a composite structure based on C/S and B/S structure .The system consists of three parts: data acquisition-side， monitoring and diagnosis-side， and data communication. It can realize the real-time data acquisition and processing， the abnormal data screening and uploading as well as signal analysis and fault diagnosis by the remote users. The life-cycle test of deep groove ball bearing-6309 shows that the system can implement the real-time monitoring of the test bearing and find out the fault's cause and position through further analysis of abnormal data. This system is of pratical value.
Key words: rolling bearing； remote monitoring； fault diagnosis； C/S structure； B/S structure
